Dear Jason,
Thanks a lot for sharing your time and help. I used the "readfile_BTS " script with “FFwind_figure” script (Visualize full-field Turbsim data and anemometer equivalent wind speed - #13 by Jason.Jonkman) to visualize the turbulent wind field.
Attached figures show the u, v and w components of the turbulent wind field at t=250.304 seconds. I could not see any discontinuity in the plots. Can you see anything unusual?
I’ve also crosschecked the output (wind field plot) of QBlade by exporting the imported windfield from QBlade into a text file. It seems like (not sure) QBlade exports the resultant wind speed. Checked David’ Marten’s thesis and QBlade manual but did not see an information. Noticed the same discontinuity problem in a post on QBlade forum and raised a question under the same post: sourceforge.net/p/qblade/discus … /?limit=25
Will inform here if I get anything from QBlade forum.
Thanks in advance for your help.
Sincerely,
Mustafa