simulink error

hello, everyone.
my name is Guk Sun and I research on WT modeling and control.
I’m working with fast, this is first time, and I think that fast is difficult to me

so, I want to simulate 5MW baseline WT model in FAST/SIMULINK envirment. (5MW onshore model)
I follow step FAST user’s guide p.35~p.37 but I can’t run the openloop.mdl with error message

Simsetup


Enter the name of the FAST input file to read

< Onshore.fst
NREL 5.0 MW Baseline Wind Turbine for Use in Offshore Analysis.
Using NWTC Subroutine Library (v1.04.01, 21-Feb-2012).

Running FAST (v7.01.00a-bjj, 16-Feb-2012)-Compiled as S-Function for Simulink.

Heading of the FAST input file: NREL 5.0 MW Baseline Wind Turbine for Use in Offshore Analysis.
VS_Rgn2K*VS_RtGnSp^2 must not be greater than VS_RtTq.

Aborting FAST.

ERROR: Call Read_Fast_Input.m before running the simulation.

Aborting program.

may be issued torque controller, how can I fix the problem?

please, give me some advices
error.jpg

Sorry, I didn’t read ‘options for the FAST S-function’ section carefully.
the problem is solved…
thanks…