Teeter input not used


Looking at the source code, I noticed that the Fast input parameter ‘TeetDmpP’ is not used by Fast (see standard Teeter model (TeetMod=1) in Fast (v7)) (or did I miss something?) i.e. if TeetMod=1 then the damper is always active, independent on the value of TeetDmpP.

Best regards,

Dear Gerrit,

Good catch! Apparently, the teeter damper position (TeetDmpP) was never implemented in the FAST source code and the feature has never been tested. I checked my records, and this bug has not been reported till now. It is straightforward to implement the use of TeetDmpP; we’ll include this in our FAST development to-do list.

Best regards,