Dear Jason,
thanks for your reply,
a) In normal situation, i didn’t mention that the tail is as shown in the first draft, so at the fully furled position is as shown in this draft (not a real wind direction).
So for this condition i set
20 TFinSkew
0.0 TFrlUSSP
-100.0 TFrlDSSP (10 degrees from the rotor)
b) Then i want to simulate another situation when the tail in normal position is perpendicular to the rotor, and it furls in the same direction as before, as shown in this draft. so i now have
20 TFinSkew
-20.0 TFrlUSSP
-100.0 TFrlDSSP (10 degrees from the rotor)
Thank you in advance
