Banded white noise simulation

Wind & Water General
1

Hi everybody,

Does anyone know how to set up the load case 2.6 in hydrodyn file? I see where I can set the white noise option (WaveMod) but not the frequency range and the PSD specified…

Thanks in advance,

Tomás

2

Dear Tomas,

Select WaveMod = 3 to enable a white-noise spectrum. The lower and upper cut-off frequencies are set via WvLowCOff and WvHiCOff. The magnitude of the PSD within this frequency range is determined by WaveHs.

Best regards,