Adjusting Pitch Angle and WIndspeed for NREL 5MW in OpenFAST

Hello, I am trying to simulate a NREL 5MW wind turbine in OpenFast that has initial conditions of 12.1 rpm, wind speed that increases from 11.4 m/s to 25 m/s, and pitch angle that is steadily increasing from 0 to 23.47 degrees. The main goal of the simulation is to have the pitch of the blade become modified above 11 m/s to consistently start to give the similar rotor power and thrust outputs that stop increasing once modified. These are some of my current inputs.

Dear @Hayden.Ntungwe,

I’m not sure I understand what your question is.

Best regards,