--------- BEAMDYN V1.01.* INPUT FILE ------------------------------------------- NREL 5MW blade ---------------------- SIMULATION CONTROL -------------------------------------- False Echo - Echo input data to ".ech" (flag) 2 analysis_type - 1: Static analysis; 2: Dynamic analysis 0.0 rhoinf - Numerical Damping Parameter for Generalized-alpha integrator 2 quadrature - 1: Gauss; 2: Trapezoidal DEFAULT refine - Refinement factor for quadrature 2. DEFAULT = 1 DEFAULT n_fact - Factorization frequency: The Jacobian is computed every n_fact steps in N-R iteration. DEFAULT = 5 DEFAULT DTBeam - Time step size DEFAULT NRMax - Max number of iterations in Newton-Ralphson algorithm DEFAULT stop_tol - Tolerance for stopping criterion ---------------------- GEOMETRY PARAMETER -------------------------------------- 1 member_total - Total number of member (-) 49 kp_total - Total number of key point (-) 1 49 - Member number; Number of key points in this member kp_xb kp_yb kp_zb initial_twist (m) (m) (m) (deg) 0.00000 0.000000 0.000000 13.308000 !JASON: 0.000000 0.000000 0.000000 13.308000 -0.00001 0.000000 0.199875 13.308000 !JASON: 0.000000 0.000000 0.199875 13.308000 -0.00038 0.000000 1.199865 13.308000 !JASON: 0.000000 0.000000 1.199865 13.308000 -0.00128 0.000000 2.199855 13.308000 !JASON: 0.000000 0.000000 2.199855 13.308000 -0.00271 0.000000 3.199845 13.308000 !JASON: 0.000000 0.000000 3.199845 13.308000 -0.00466 0.000000 4.199835 13.308000 !JASON: 0.000000 0.000000 4.199835 13.308000 -0.00715 0.000000 5.199825 13.308000 !JASON: 0.000000 0.000000 5.199825 13.308000 -0.01016 0.000000 6.199815 13.308000 !JASON: 0.000000 0.000000 6.199815 13.308000 -0.01371 0.000000 7.199805 13.308000 !JASON: 0.000000 0.000000 7.199805 13.308000 -0.01778 0.000000 8.201025 13.308000 !JASON: 0.000000 0.000000 8.201025 13.308000 -0.02238 0.000000 9.199785 13.308000 !JASON: 0.000000 0.000000 9.199785 13.308000 -0.02751 0.000000 10.199775 13.308000 !JASON: 0.000000 0.000000 10.199775 13.308000 -0.03316 0.000000 11.199765 13.181000 !JASON: 0.000000 0.000000 11.199765 13.181000 -0.03935 0.000000 12.199755 12.848000 !JASON: 0.000000 0.000000 12.199755 12.848000 -0.04607 0.000000 13.200975 12.192000 !JASON: 0.000000 0.000000 13.200975 12.192000 -0.05331 0.000000 14.199735 11.561000 !JASON: 0.000000 0.000000 14.199735 11.561000 -0.06108 0.000000 15.199725 11.072000 !JASON: 0.000000 0.000000 15.199725 11.072000 -0.06938 0.000000 16.199715 10.792000 !JASON: 0.000000 0.000000 16.199715 10.792000 -0.08759 0.000000 18.200925 10.232000 !JASON: 0.000000 0.000000 18.200925 10.232000 -0.10789 0.000000 20.200290 9.672000 !JASON: 0.000000 0.000000 20.200290 9.672000 -0.13031 0.000000 22.200270 9.110000 !JASON: 0.000000 0.000000 22.200270 9.110000 -0.15484 0.000000 24.200250 8.534000 !JASON: 0.000000 0.000000 24.200250 8.534000 -0.18149 0.000000 26.200230 7.932000 !JASON: 0.000000 0.000000 26.200230 7.932000 -0.21027 0.000000 28.200825 7.321000 !JASON: 0.000000 0.000000 28.200825 7.321000 -0.24114 0.000000 30.200190 6.711000 !JASON: 0.000000 0.000000 30.200190 6.711000 -0.27414 0.000000 32.200170 6.122000 !JASON: 0.000000 0.000000 32.200170 6.122000 -0.30925 0.000000 34.200150 5.546000 !JASON: 0.000000 0.000000 34.200150 5.546000 -0.34647 0.000000 36.200130 4.971000 !JASON: 0.000000 0.000000 36.200130 4.971000 -0.38583 0.000000 38.200725 4.401000 !JASON: 0.000000 0.000000 38.200725 4.401000 -0.42727 0.000000 40.200090 3.834000 !JASON: 0.000000 0.000000 40.200090 3.834000 -0.47084 0.000000 42.200070 3.332000 !JASON: 0.000000 0.000000 42.200070 3.332000 -0.51653 0.000000 44.200050 2.890000 !JASON: 0.000000 0.000000 44.200050 2.890000 -0.56433 0.000000 46.200030 2.503000 !JASON: 0.000000 0.000000 46.200030 2.503000 -0.61428 0.000000 48.201240 2.116000 !JASON: 0.000000 0.000000 48.201240 2.116000 -0.66628 0.000000 50.199990 1.730000 !JASON: 0.000000 0.000000 50.199990 1.730000 -0.72043 0.000000 52.199970 1.342000 !JASON: 0.000000 0.000000 52.199970 1.342000 -0.77669 0.000000 54.199950 0.954000 !JASON: 0.000000 0.000000 54.199950 0.954000 -0.80561 0.000000 55.199940 0.760000 !JASON: 0.000000 0.000000 55.199940 0.760000 -0.83507 0.000000 56.199930 0.574000 !JASON: 0.000000 0.000000 56.199930 0.574000 -0.86505 0.000000 57.199920 0.404000 !JASON: 0.000000 0.000000 57.199920 0.404000 -0.88024 0.000000 57.699915 0.319000 !JASON: 0.000000 0.000000 57.699915 0.319000 -0.89560 0.000000 58.201140 0.253000 !JASON: 0.000000 0.000000 58.201140 0.253000 -0.91101 0.000000 58.699905 0.216000 !JASON: 0.000000 0.000000 58.699905 0.216000 -0.92660 0.000000 59.199900 0.178000 !JASON: 0.000000 0.000000 59.199900 0.178000 -0.94232 0.000000 59.699895 0.140000 !JASON: 0.000000 0.000000 59.699895 0.140000 -0.95817 0.000000 60.199890 0.101000 !JASON: 0.000000 0.000000 60.199890 0.101000 -0.97415 0.000000 60.699885 0.062000 !JASON: 0.000000 0.000000 60.699885 0.062000 -0.99026 0.000000 61.199880 0.023000 !JASON: 0.000000 0.000000 61.199880 0.023000 -1.00000 0.000000 61.500000 0.000000 !JASON: 0.000000 0.000000 61.500000 0.000000 ---------------------- MESH PARAMETER ------------------------------------------ 5 order_elem - Order of interpolation (basis) function (-) ---------------------- MATERIAL PARAMETER -------------------------------------- "NRELOffshrBsline5MW_BeamDyn_Blade.dat" BldFile - Name of file containing properties for blade ---------------------- PITCH ACTUATOR PARAMETERS ------------------------------- False UsePitchAct - Whether a pitch actuator should be used (flag) 200 PitchJ - Pitch actuator inertia (kg-m^2) [used only when UsePitchAct is true] 2.0E+7 PitchK - Pitch actuator stiffness (kg-m^2/s^2) [used only when UsePitchAct is true] 5.0E+5 PitchC - Pitch actuator damping (kg-m^2/s) [used only when UsePitchAct is true] ---------------------- OUTPUTS ------------------------------------------------- True SumPrint - Print summary data to ".sum" (flag) "ES10.3E2" OutFmt - Format used for text tabular output, excluding the time channel. Resulting field should be 10 characters. (quoted string) 0 NNodeOuts - Number of nodes to output to file [0 - 9] (-) 1,2,3,4,5,6 OutNd - Nodes whose values will be output (-) OutList - The next line(s) contains a list of output parameters. See OutListParameters.xlsx for a listing of available output channels, (-) "RootFxr, RootFyr, RootFzr" "RootMxr, RootMyr, RootMzr" "TipTDxr, TipTDyr, TipTDzr" "TipRDxr, TipRDyr, TipRDzr" END of input file (the word "END" must appear in the first 3 columns of this last OutList line) --------------------------------------------------------------------------------