C:\OWT\OWT\model01\DLC1.2>C:\OWT\OWT\bin\OpenFAST_x64 DLC1.2_04mps.fst ************************************************************************************************** OpenFAST Copyright (C) National Renewable Energy Laboratory This program is licensed under Apache License Version 2.0 and comes with ABSOLUTELY NO WARRANTY. See the "LICENSE" file distributed with this software for details. ************************************************************************************************** OpenFAST-v1.0.0 Compile Info: - Architecture: 64 bit - Precision: single Execution Info: - Date: 03/29/2020 - Time: 18:04:26-0300 OpenFAST input file heading: FAST Certification Test #19: NREL 5.0 MW Baseline Wind Turbine with OC3 Monopile RF Configuration, for use in offshore analysis Running ElastoDyn. Running AeroDyn. Running AirfoilInfo. Running BEM. Running UnsteadyAero. Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 1, Blade = 1 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 2, Blade = 1 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 3, Blade = 1 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 4, Blade = 1 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 1, Blade = 2 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 2, Blade = 2 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 3, Blade = 2 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 4, Blade = 2 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 1, Blade = 3 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 2, Blade = 3 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 3, Blade = 3 Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 4, Blade = 3 Running InflowWind. Reading a 16x16 grid (145 m wide, 17.5 m to 162.5 m above ground) with a characteristic wind speed of 4 m/s. This full-field file was generated by TurbSim (v1.06.00, 21-Sep-2012) on 27-Mar-2020 at 22:12:45. Processed 13325 time steps of 20-Hz full-field data (666.2 seconds). Running ServoDyn. Running ServoDyn Interface for Bladed Controllers. Running HydroDyn. Generating incident wave kinematics and current time history. Running SubDyn. Calculating Internal Modal Eigenvectors Timestep: 0 of 630 seconds. FAST_Solution0:CalcOutputs_And_SolveForInputs:SolveOption2:SrvD_CalcOutput:Running with torque and pitch control of the NREL offshore 5MW baseline wind turbine from DISCON.dll as written by J. Jonkman of NREL/NWTC for use in the IEA Annex XXIII OC3 studies. Timestep: 7 of 630 seconds. Estimated final completion at 18:12:16. Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 5, Blade = 2 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 6, Blade = 2 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 5, Blade = 1 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 7, Blade = 2 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 6, Blade = 1 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 0.17203, Vy = -5.5975, rlocal = 19.938, theta = 0.17735, geometric phi = 3.1109 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -3.2084, Vy = -18.708, rlocal = 15.843, theta = 0.20037, geometric phi = -2.9717 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -0.54159, Vy = -13.75, rlocal = 19.938, theta = 0.17737, geometric phi = -3.1022 BEMT_UpdateStates(node 8, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 0.31486, Vy = -5.852, rlocal = 24.035, theta = 0.15728, geometric phi = 3.0878 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 8, Blade = 2 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 17, Blade = 3 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 18, Blade = 3 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -3.4704, Vy = -18.301, rlocal = 11.744, theta = 0.23227, geometric phi = -2.9542 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -1.2029, Vy = -14.304, rlocal = 15.843, theta = 0.20037, geometric phi = -3.0577 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 1.0431, Vy = -8.3239, rlocal = 19.938, theta = 0.17738, geometric phi = 3.0169 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 18, Blade = 1 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 18, Blade = 2 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 7, Blade = 1 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 8, Blade = 1 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -2.8317, Vy = -26.905, rlocal = 11.746, theta = 0.23225, geometric phi = -3.0367 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 0.10768, Vy = -23.214, rlocal = 15.847, theta = 0.20032, geometric phi = 3.137 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 2.4836, Vy = -17.618, rlocal = 19.944, theta = 0.17728, geometric phi = 3.0015 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -4.1183, Vy = -39.535, rlocal = 11.747, theta = 0.23226, geometric phi = -3.0378 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -0.78735, Vy = -34.614, rlocal = 15.847, theta = 0.20033, geometric phi = -3.1188 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 2.0564, Vy = -27.582, rlocal = 19.944, theta = 0.17729, geometric phi = 3.0672 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 17, Blade = 1 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 19, Blade = 1 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 9, Blade = 2 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 5, Blade = 3 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 6, Blade = 3 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -2.4075, Vy = -33.486, rlocal = 11.746, theta = 0.23226, geometric phi = -3.0698 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 0.31288, Vy = -27.859, rlocal = 15.846, theta = 0.20034, geometric phi = 3.1304 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 2.8795, Vy = -20.437, rlocal = 19.944, theta = 0.17731, geometric phi = 3.0016 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 16, Blade = 1 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 2, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 3.40405E-02, Vy = -26.971, rlocal = 2.864, theta = 0.23227, geometric phi = 3.1403 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 17, Blade = 2 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 14, Blade = 3 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 11.053, Vy = -52.422, rlocal = 11.747, theta = 0.23229, geometric phi = 2.9338 BEMT_UpdateStates(node 9, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 1.5709, Vy = -11.417, rlocal = 28.131, theta = 0.13632, geometric phi = 3.0049 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 9, Blade = 1 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 9.2715, Vy = -56.386, rlocal = 11.746, theta = 0.23228, geometric phi = 2.9786 BEMT_UpdateStates(node 6, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 7.7449, Vy = -47.927, rlocal = 15.846, theta = 0.2004, geometric phi = 2.9814 BEMT_UpdateStates(node 7, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 5.4604, Vy = -38.213, rlocal = 19.941, theta = 0.17743, geometric phi = 2.9997 BEMT_UpdateStates(node 8, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 2.5407, Vy = -26.769, rlocal = 24.037, theta = 0.15738, geometric phi = 3.047 BEMT_UpdateStates(node 9, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -0.5906, Vy = -12.751, rlocal = 28.132, theta FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 8.1188, Vy = -41.399, rlocal = 11.745, theta = 0.23227, geometric phi = 2.9479 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 0.31334, Vy = -35.571, rlocal = 11.749, theta = 0.23221, geometric phi = 3.1328 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 1.9428, Vy = -30.213, rlocal = 15.852, theta = 0.20022, geometric phi = 3.0774 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 3.516, Vy = -23.847, rlocal = 19.951, theta = 0.17708, geometric phi = 2.9952 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -1.252, Vy = -44.392, rlocal = 11.749, theta = 0.23222, geometric phi = -3.1134 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 1.1853, Vy = -38.726, rlocal = 15.851, theta = 0.20024, geometric phi = 3.111 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 3.4713, Vy = -31.624, rlocal = 19.95, theta = 0.17712, geometric phi = 3.0323 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -0.95972, Vy = -34.984, rlocal = 11.748, theta = 0.23223, geometric phi = -3.1142 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 0.58679, Vy = -29.652, rlocal = 15.85, theta = 0.20027, geometric phi = 3.1218 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 2.4104, Vy = -23.281, rlocal = 19.949, theta = 0.17716, geometric phi = 3.0384 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 1.8152, Vy = -11.872, rlocal = 11.748, theta = 0.23223, geometric phi = 2.9899 Timestep: 8 of 630 seconds. Estimated final completion at 18:14:35. FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 15.634, Vy = -74.613, rlocal = 11.746, theta = 0.23228, geometric phi = 2.935 BEMT_UpdateStates(node 9, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 3.8709, Vy = -28.627, rlocal = 28.135, theta = 0.13609, geometric phi = 3.0072 Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 10, Blade = 1 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 13.119, Vy = -58.79, rlocal = 11.745, theta = 0.23228, geometric phi = 2.922 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 2.0281, Vy = -11.253, rlocal = 11.747, theta = 0.23225, geometric phi = 2.9633 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 1.4203, Vy = -9.8273, rlocal = 15.847, theta = 0.20031, geometric phi = 2.9981 FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -1.0336, Vy = -41.59, rlocal = 11.746, theta = 0.23226, geometric phi = -3.1167 BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = -0.31393, Vy = -39.489, rlocal = 15.845, theta = 0.20034, geometric phi = -3.1336 BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 0.71932, Vy = -35.142, rlocal = 19.941, theta = 0.17731, geometric phi = 3.1211 BEMT_UpdateStates(node 8, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 1.682, Vy = -27.2, rlocal = 24.039, theta = 0.15718, geometric phi = 3.0798 BEMT_UpdateStates(node 9, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx = 2.537, Vy = -17.185, rlocal = 28.137, thet FAST encountered an error at simulation time 8.02 of 630 seconds. Simulation error level: FATAL ERROR Aborting OpenFAST.