Sensitivity of power to blade pitch with linearization

Wind & Water Controls
3

Dear Jason

I am sorry. I linked wrong address.

I modified the link to following link.

I followed all the steps for obtaining the sensitivity of blade pitch to power. I didn’t obtain what I wanted. There is no information in the D-Trnsmt Matrix. Could you help me?

Linearized State Matrices:

--------- Azimuth = 0.00 deg (with respect to AzimB1Up = 0.00 deg) ---------
op State | op | A - State | B - Input
Derivativs | States | Matrix | Matrix
0.000E+00 | 0.000E+00 | 0.000E+00 1.000E+00 | 0.000E+00
0.000E+00 | 0.000E+00 | -3.553E+02 -7.541E-01 | 0.000E+00

op Output | This colmn | C - Output | D - Trnsmt
Measurmnts | is blank | Matrix | Matrix
4.815E-13 | | -1.521E+06 -3.228E+03 | 0.000E+00
0.000E+00 | | 0.000E+00 0.000E+00 | 0.000E+00
1.492E+01 | | 0.000E+00 0.000E+00 | 5.730E+01
1.210E+01 | | 0.000E+00 0.000E+00 | 0.000E+00
1.174E+03 | | 0.000E+00 0.000E+00 | 0.000E+00

--------- Azimuth = 10.00 deg (with respect to AzimB1Up = 0.00 deg) ---------
op State | op | A - State | B - Input
Derivativs | States | Matrix | Matrix
0.000E+00 | 0.000E+00 | 0.000E+00 1.000E+00 | 0.000E+00
0.000E+00 | 0.000E+00 | -3.553E+02 -7.541E-01 | 0.000E+00

op Output | This colmn | C - Output | D - Trnsmt
Measurmnts | is blank | Matrix | Matrix
5.314E-13 | | -1.521E+06 -3.228E+03 | 0.000E+00
0.000E+00 | | 0.000E+00 0.000E+00 | 0.000E+00
1.492E+01 | | 0.000E+00 0.000E+00 | 5.730E+01
1.210E+01 | | 0.000E+00 0.000E+00 | 0.000E+00
1.174E+03 | | 0.000E+00 0.000E+00 | 0.000E+00